certifications

Product Standard

Code Country Description
TCVN
TCVN
Vietnam

Analysising on the standard, metrology and quality. The combination of technical standard, term, labeling process, sample and warranty also.

ASTM
ASTM
USA

ASTM International is one of the largest voluntary standards developing organizations in the world. We are a not-for-profit organization that provides a forum for the development and publication of international voluntary consensus standards for materials, products, systems and services

ANSI
ANSI
US

The American National Standards Institute is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States. The organization also coordinates U.S. standards with international standards so that American products can be used worldwide.

NFPA
NFPA
US

Including publications from model building codes to the many on equipment utilized by firefighters while engaging in hazardous material (hazmat) response, rescue response, and some firefighting

ISO
ISO
Global

Management system designed to enable effective and efficient domestic incident management by integrating a combination of facilities, equipment, personnel, procedures, and communications operating within a common organizational structure, designed to enable effective and efficient domestic incident management.

EN
EN
Europe

European Standards (ENs) are documents that have been ratified by one of the three European Standardization Organizations (ESOs), CEN, CENELEC or ETSI; recognized as competent in the area of voluntary technical standardization as for the EU Regulation 1025/2012.

BS
BS
UK

Setting up standards of quality for goods and services

DIN
DIN
Germany

German standards with primarily domestic significance or designed as a first step toward international status.

AS/NZS
AS/NZS
AUS/NZ

Sets out basic requirements and good practice for the design, materials, manufacture, examination, testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment.

JIS
JIS
Japan

Specifies the standards used for industrial activities in Japan. The standardization process is coordinated by the Japanese Industrial Standards Committee and published through the Japanese Standards Association.

ACS
ACS
France

Health compliance certificate (ACS) is an official authorization issued by the Directorate General of Health, which became mandatory in France since 24 December 2006.

Green Standard

Code Country Description
LEED
LEED
US

Leadership in Energy and Environmental Design (LEED) is one of the most popular green building certification programs used worldwide, established in 1995 in The United States.

Notes: There is no LEED products, they only contribute to the credits/prerequisites of LEED.

BREEAM
BREEAM
UK

BREEAM is the world's leading sustainability assessment method for masterplanning project, infrastructure and buildings in the UK.

LOTUS
LOTUS
Vietnam

LOTUS is a set of voluntary market-based green building rating systems developed by the VGBC specifically for the Vietnamese built environment

LBC
LBC
Global

A Living Building is a demonstration that the built environment can actually help restore the natural environment. A project achieves Living Building Certification by attaining all Imperatives assigned to its Typology.

NGBS
NGBS
US

Green text indicates product has been Green Certified by the Home Innovation Research Labs to automatically earn points for this particular credit. 

SCS
SCS
Global

Trusted leader in based on Green Seal standards, which contain performance, health and sunstainability criteria.

BIFMA
BIFMA
US

The Business and Institutional Furniture Manufacturer’s Association (BIFMA) creates standards for evaluating the safety, durability, ergonomics, toxicity and structural adequacy of contract furniture.

NAHB
NAHB
US

Enhancing the climate for housing and the building industry. Chief among NAHB's goals is providing and expanding opportunities for all consumers to have safe, decent and affordable housing.

Energy Star
Energy Star
US

Energy Star  is an international standard for energy efficient consumer products originated in the US for heating and cooling systems, appliances, home electronics, lighting, computers, and even new homes.

ISO 14001
ISO 14001
Global

ISO 14001 is one of the most commonly used environmental management standards in carpet manufacturing and so on.

OHSAS 18001
OHSAS 18001
UK

Existing to help all kinds of organizations put in place demonstrably sound occupational health and safety performance. It is a widely recognized and popular occupational health and safety management system.

FSC
FSC
Germany

An international non-profit, multi-stakeholder organization established in 1993 to promote responsible management of the world’s forests. The FSC does this by setting standards on forest products, along with certifying and labeling them as eco-friendly.

BES Global

The electrical generation resouces, transmission lines, interconnections with neighboring systems and associated equiment, generally operated at voltages of 100kV or higher

Green Seal
Green Seal
US

Green Seal has standards and provides certification for products and services in the following categories: Building & Construction Products, Cleaning Products & Services, Household Products, Paint & Coating Products...

Rainforest Alliance
Rainforest Alliance
US

Working to consever biodiversity and ensure sustainable livelihoods by transforming land-use practices, business practices and consumer behavior.

Green-e
Green-e
Global

Green-e is the trusted global leader in clean energy certification.

GreenGuard
GreenGuard
US

GREENGUARD Certification helps manufacturers create and helps buyers identify interior products and materials that have low chemical emissions, improving the quality of the air in which the products are used. 

WaterSense
WaterSense
US

WaterSense is designed to encourage water efficiency through the use of a special label on consumer products.

Ecologo
Ecologo
Cananda

Helping consumers identify services/products which are less harmful to the environment.

UL Environment
UL Environment
US

Providing safety-related certification, validation, testing, inspection, auditing, advising and training services to a wide range of clients, including manufacturers, retailers, policymakers, regulators, service companies, and consumers.

Cradle-to-Cradle
Cradle-to-Cradle
US

The Cradle to Cradle Certified™ mark provides consumers, regulators, employees, and industry peers with a clear, visible, and tangible validation of a manufacturer’s ongoing commitment to sustainability and to their communities.

Green Label Plus
Green Label Plus
US

Green Label Plus is an independent testing program that identifies carpet, adhesives, and cushion with very low emissions of VOCs to help improve indoor air quality. 

SGLS
SGLS
Singapore

Helping the public identify environment-friendly products that meet certain eco-standards specified by the scheme and seeks.

PCF
PCF
Global

A chain of custody for all raw materials, measures the impact of a manufacturing process on the environment.

CFI
CFI
Global

A nonprofit, trade organization devoted to flooring installers, both independent installers and members of other organizations.

NWFA
NWFA
US

A not-for-profit trade association representing all segments of the hardwood flooring industry, including manufacturers, distributors, retailers, installers, importers and inspectors.

Floor Score
Floor Score
Global

The most recognized indoor air quality (IAQ) certification standard for hard surface flooring materials, adhesives, and underlayments.

Certifire
Certifire
Global

Assuring performance, quality, reliability and traceability of fire protection products.

Welcome to Vibuma!
Please tell us what you think about our website. Any kind of feedback is highly appreciated.